Friday, August 30, 2013

Caring For Plastic/Acrylic Sewing Tools

 

How much plastic stuff is in your sewing room? If you've been sewing or quilting for awhile, you may have clear plastic rulers, templates, French curves, maybe even a sewing machine extension table. Another name for that clear plastic is acrylic, which you may know by trade names such as Plexiglas, Lucite, or Crystalline.  Caring for your acrylic sewing tools the right way will help keep them all clean, scratch free, and can even extend the life of your tools.

First some quick DO'S and DONT'S for acrylic care:

DUSTING:
DON'T use paper towels or other abrasive cloths. DO use soft, clean 100% cotton rags (like all cotton t-shirts or old cloth diapers/burp cloths).

CLEANING:
DON'T use cleaning products that include abrasives, bleach or ammonia (Windex). DO use plastic-safe cleaning products like Sparkle or Plexi-Clean (both of which I find at my local Ace Hardware).

STORAGE:
DON'T store plastic items in direct sunlight for extended periods of time. DO store plastic items away from extended exposure to direct sunlight. DON'T store plastic items in a place where temperatures may fluctuate greatly, like an attic or outbuilding with no heat/air conditioning. DO store plastic items in an environment with stable temperatures, like in your home that has temperature control.


CARE OF RULERS/TEMPLATES



Clear acrylic rulers and templates come in many, many shapes and sizes. You can safely store them flat, or if your ruler comes with a pre-made hole you can hang them up on the wall (think pegboard!). You can store your rulers in an upright container or wall pockets as long as the rulers are properly supported; they should appear straight when stored, not bent or bowed.

Rulers and templates can be damaged from dropping (ask me how I know this!), like the one below...

 
Ooops!
...and your rulers can cloud over from repeated scratches from pins, needles, and anything else the ruler scraps against.

I've had this French Curve for over 20 years!

Clean acrylic rulers by dusting occasionally with a soft 100% cotton cloth. If your ruler is really dirty and you need to use a cleaner, try some very mild soap and water, Sparkle, or another cleaner made specially for plastics. In very extreme cases where a ruler has lots of scratches, you may choose to use a plastic polish, which will buff out small scratches. Be sure to only use the plastic polish on the side of the ruler without the printed markings; the polish can take the numbers and marks right off of the ruler! In my case, as long as I can see what I need to see with the ruler, I don't do any polishing - I just keep them clean.


CARING FOR YOUR EXTENSION TABLE


Plastic extension tables are GREAT for creating more sewing space for stitching large projects or quilting. When not in use, store your extension table in an area where it won't get bumped or knocked over; store either flat or upright, and make sure it is not bent or bowed. If your extension table came with a cover, use it!

Clean by dusting with a soft cotton cloth. If you need to use a cleaner (like if you accidentally got some spray adhesive...or maybe chocolate) on the table, use mild soap and water, Sparkle, or another cleaner made specifically for plastics. You may find after lots of use that your table has small scratches from pins, or from repeatedly laying scissors on the table. As long as there are no plastic burrs sticking up from the scratches that could catch on fabric, it's only cosmetic and won't affect your sewing. If you really want to, you can use plastic polish to buff out some of the smaller scratches and bring back the shine to your table. Just like with the rulers, if there are markings underneath your table don't polish over them, you could buff the markings right off.


AND ONE MORE THING...


These days most sewing machines have plastic covers. You can follow some of the same general directions above for taking care of the outside of your sewing machine, but here are a few extra tips.

If your sewing machine has extra shiny plastic parts or metallic plastic, be extra vigilant about using a super soft cotton cloth to clean these parts to avoid dulling and scratching!

When using a spray cleaner (and as listed above, only use a plastic safe cleaner!), be sure to spray the rag and never directly on the sewing machine.


Be careful of cleaning computerized screens on your sewing machine! Use a cleaner specifically made for cleaning electronics, or check in your sewing machine user manual to see what the manufacturer suggests. Don't press too hard on the computerized screen, or use any cleaners with abrasives, bleach or ammonia that may cloud the screen.

YELLOWING PLASTIC

Plastic yellowing on 20 year old machine.

Some plastics yellow over time due to the chemical composition of the plastic. Sometimes this process is speeded up by exposure to light (the same UV rays that cause sunburn). There's really not much you can do about yellowing plastic. I've read online that some people suggest bleaching yellowed plastic, but adding bleach may eventually do more harm by possibly changing the chemical composition of the plastic, making it brittle and fragile. It's only cosmetic, and as long as your machine is still in great working order, don't worry about a little "aging"!

Plastic casings starting to discolor.

If your sewing machine with plastic parts is out in a sewing cabinet or table, make a  cover for the machine - it will keep the dust off and prevent or slow down some of the yellowing that might take place over time. If you sew in a temporary area, make sure to put your sewing machine away when not in use. Thankfully, plastics have improved and I believe many manufacturers are using a higher grade plastic that resists yellowing over time.

Look for plastic safe cleaners, plastic polish, and 100% cotton cleaning cloths at your local hardware store (my local Ace Hardware has several cleaners and polishes made for plastics).

I hope these tips are helpful to you, and may your plastic sewing tools live long and prosper!

15 comments:

alethia said...

Great information.

Tonya Reichard said...

Thank you for the valuable info....and yes, I have a ruler that is chipped from dropping too!!!

Anonymous said...

Thank you for this, it is a good reminder lesson.

Lori Bain said...

Hmmm, let's see - do I have a ruler that I haven't chipped???

Sharon said...

Very helpful, thanks so much.

Susan said...

Your "Ooops" photo looks exactly like my ruler! I am sure someone will come up with some ruler protecters in the future.

Anna Sangl said...

I tend to get a curve in my acrylic ruler after much use - I keep buying new ones so that when I cut my fabric the edge is straight. is there any way to fix the edge of the rulers so they are straight again or do I just throw them away?

Miss Sews-it-all said...

HI Anna, I've never experienced a curve in my acrylic rulers from use, so I don't know if it can be corrected. If you ruler is bowing out, it may be bending due to heat or not being stored flat. If you are cutting with a knife, maybe it is possible that you are also wearing down the side of the ruler? I'm really not sure!

Cheryl Haupt said...

Acrylic rulers can get worn on the edges after several years of heavy use. I have a 6 x 24" one that I used for about 10 years in my canvas-work shop, with a large rotary cutter. Then when I started quilting, I was getting inconsistent 1/4 seam allowances. Checked it against a new ruler, and the edge is worn away just slightly, but enough to make a difference.

Miss Sews-it-all said...

Great tip Cheryl!

Crafty Garden said...

I had some basting spray dried on my cutting board so I thought I would try using coconut oil to remove it and it worked beautifully. I just thought I'd pass that on.

Mary Herold said...

I have one of those racks for my rulers and found they are great for smaller rulers but my big and long ones will not bow if you hang them up flat or lay them flat. I use command hooks.....they work great.

Alejandra Alcantara said...

Mr. Clean Magic Eraser is also fabulous.

Miss Sews-it-all said...

Hey Mary Herold, thanks for stopping by, and that is a great tip to use the command hooks! Happy stitching - Erika

Miss Sews-it-all said...

Thanks Alejandra Alcantara that is a fantastic tip to use a magic eraser. I'd suggest trying these out in a small area or an older ruler first, sometimes these types of cleaners can rub off the markings from the ruler. Happy stitching - Erika